1
2
VOX
/ iVOX
(handsfree)
When this function is active, the walkie-talkie automatically starts
to transmit when the unit detects your voice or a sound.
☞
When you start to speak, there is a slight delay before the
walkie-talkie starts to transmit.
Activate VOX mode
When using VOX1 mode, conversation is carried out via a head-
set. The PTT button on the walkie-talkie need not be pressed to
transmit.
Use a commercially available headset without a PTT button
equipped with a 3-pin, 2.5 mm stereo jack plug.
Pin assignment::
☞
Switch the walkie-talkie off before connecting a headset.
The headset supplied with the walkie-talkie is not designed
for this function because it is equipped with a PTT button.
1. Switch the walkie-talkie off.
2. Raise the cover on the connection socket.
3. Insert the plug on the headset in the connection socket.
4. Switch the walkie-talkie on.
5. "VOX" appears in the display.
Deactivating VOX mode
To deactivate VOX mode, pull the headset plug out of the con-
nection socket.
1
VOX: Voice Operated Transmission = Noise detection
2
iVOX: Intelligent Voice Operated Transmission = Noise detec-
tion
Operating the Walkie-Talkies
1 = Loudspeaker
2 = Microphone
3 = Earth
GB
13