C) System Clock; D) Sd Card Format; Power Saving - Conrad 75 18 00 Bedienungsanleitung

c) System clock

d) SD card format

e) Power Saving
Use the "left" and "right" buttons G G D D (D, J) on the
remote control to select which value is to be set
(year, month, day, hour, minute) and then adjust the
desired value with the "up" and "down" buttons S S F F
(I,K). Then press the "OK" button
This menu can be used to format any inserted SD
memory card.
Note that all data on the inserted SD memory
card is deleted during formatting.
Ensure that the card is not locked.
We strongly recommend formatting the SD
memory card before first use.
Use the "left" and "right" buttons G G D D (D, J) on the
remote control to activate (ON) or deactivate (OFF)
power save mode. Then press the "OK" button
(E) to confirm.
When power saving mode is activated (ON), the
display is deactivated if there is no input for more
than 2 minutes, whereas sound stays activated.
Press any button to reactivate the display.
(E) to confirm.
41