b) Motion detection record period
c) SD card overwrite
11.3 "Event List" menu
Press the "OK" button
pause playback.
Press the "Enter/Exit Menu" button
(E) to open the recordings folder. Then press "OK"
(C) to stop playback.
Use the "left" and "right" buttons G G D D (D, J) on the
remote control to select the desired length of
recording from the time the detected motion occurs
(OFF/5 sec/10 sec/15 sec/always) and then press
"OK"
(E) to confirm.
Motion detection is deactivated for 5 seconds after
any recording or alarm triggered by a motion detec-
tion, was interrupted manually.
Use the "left" and "right" buttons G G D D (D, J) on the
remote control to activate (ON) or deactivate (OFF)
SD-CARD-OVERWRITE and then press "OK"
(E) to confirm.
When SD-CARD-OVERWRITE is activated (=ON),
the first recorded data is automatically overwritten
when the full storage capacity is reached.
(E) again to start or
39