Adjusting The Telescopic Arm; Working Safely; Transport - FLORABEST FAHE 18 A1 Betriebsanleitung

Adjusting the Telescopic arm

The telescopic arm (7) can be infinitely ad-
justed using quick release (17).
1. Push the lever (17a) forward
as shown in the illustration then
push and pull to adjust the han-
dle length.
2. Pull back the lever (17a) and so
fix the desired working length of
the telescopic arm.
3. If the lever (17a) loosens, tighten
the Allen screw (17b) using the
wrench (8).

Working Safely

• Keep the equipment, cutting attach-
ments and protective blade cover in
good condition in order to prevent inju-
ry.
• If dropped, check the equipment for
significant damage or defects.
• Observe the specified working angle
60°±10°, in order to guarantee safe
working.
• Do not use the cordless pruner when
standing on a ladder or in an unsafe
position.
• Do not be tempted to make unconsid-
ered cuts. Doing so may endanger
both yourself and others.
• Children must be supervised to ensure
that they do not play with the equip-
ment.
• Change your working position regu-
larly. Long use of the equipment can
result in vibration-related circulatory
disorders in the hands. However, the
length of use can be extended by us-
ing suitable gloves or taking regular
breaks. Note that a personal tendency
for poor circulation, low outdoor tem-
peratures, or high gripping forces dur-
ing work will reduce the length of use.

Transport

• Put on blade cover (
• Ensure that you do not switch on the
equipment when carrying it.
GB IE CY
21).
19