Technical Data; Declaration Of Conformity; Noise/Vibration Information - Bosch GBH Professional 36 V-LI Originalbetriebsanleitung

OBJ_BUCH-283-006.book Page 16 Friday, December 14, 2012 1:10 PM
16 | English
10 Release button for mode selector switch
11 Mode selector switch
12 Battery unlocking button
13 Button for depth stop adjustment
14 Temperature control indicator
15 Battery charge-control indicator
16 Button for charge-control indicator
17 Battery pack*
18 Depth stop
19 Auxiliary handle (insulated gripping surface)
20 Securing screw for key type drill chuck*
21 Key type drill chuck*
22 SDS-plus adapter shank for drill chuck*
23 Drill chuck mounting (GBH 36 VF-LI)
24 Front sleeve of the quick change keyless chuck
(GBH 36 VF-LI)
25 Retaining ring of the quick change keyless chuck
(GBH 36 VF-LI)
26 Extraction sleeve of the dust extraction attachment*
27 Clamping screw for the dust extraction attachment*
28 Depth stop of the dust extraction attachment*
29 Telescopic pipe of the dust extraction attachment*
30 Wing bolt of the dust extraction attachment*
31 Guide pipe of the dust extraction attachment*
32 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Rotary Hammer
Article number 3 611 J00 R.. 3 611 J01 R..
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated voltage V=
Rated power input W
Output power W
-1
Impact rate min
Impact energy per
stroke according to
EPTA-Procedure
05/2009 J
Rated speed
-1
– Right rotation min
-1
– Left rotation min
Tool holder
Spindle
collar diameter mm
1 609 92A 04C | (14.12.12)

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 14.12.2012

Noise/Vibration Information

Measured sound values determined according to EN 60745.
GBH 36 V-LI GBH 36 VF-LI
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); sound power level
 
102 dB(A). Uncertainty K=3 dB.
 
Wear hearing protection!
 
GBH 36 V-LI

–
Vibration total values a
determined according to EN 60745:
36 36
Hammer drilling into concrete: a
600 600
Chiselling: a
430 430
Drilling in metal: a
0 –4260 0 –4260
Screwdriving without impact: a
GBH 36 VF-LI
Vibration total values a
determined according to EN 60745:
2.8 2.8
Hammer drilling into concrete: a
Chiselling: a
0 –960 0 –960
Drilling in metal: a
0 –930 0 –930
Screwdriving without impact: a
SDS-plus SDS-plus
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
50 50
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
Rotary Hammer GBH 36 V-LI GBH 36 VF-LI
Drilling diameter,
max.:
– Concrete mm
– Brickwork (with
core bit) mm
– Steel mm
– Wood mm
Weight according to
EPTA-Procedure
01/2003 kg
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
(triax vector sum) and uncertainty K
h
=19 m/s
h
2
=11.5 m/s , K=1.5 m/s
h
2
<2.5 m/s , K=1.5 m/s
h
<2.5 m/s
h
(triax vector sum) and uncertainty K
h
=19 m/s
h
2
=11 m/s , K=1.5 m/s
h
2
<2.5 m/s , K=1.5 m/s
h
<2.5 m/s
h
26 26
68 68
13 13
30 30
4.3 4.5
2 2
, K=1.5 m/s ,
2
,
2
,
2 2
, K=1.5 m/s
2 2
, K=1.5 m/s ,
2
,
2
,
2 2
, K=1.5 m/s
Bosch Power Tools