Technical Data; Impact Drill; Noise/Vibration Information - Bosch AdvancedImpact 900 Originalbetriebsanleitung

16 | English
(7) Speed preselection thumbwheel
(8) Release button for Drill Assistant
(9) Auxiliary handle with depth stop
a)
(10) Drill Assistant
a)
(11) Dust container
(12) Dust container release button (2x)
a)
(13) Dust collection device
a)
(14) Sealing ring
a)
(15) Dust protection ring
(16) Clamp for dust collection device
a)
(17) Adjusting ring
(18) Wing bolt for auxiliary handle attachment for Drill As-
a)
sistant
(19) Handle (insulated gripping surface)
(20) Auxiliary handle (insulated gripping surface)
(21) Wing bolt for auxiliary handle attachment
(22) Button for depth stop adjustment
a)
(23) Depth stop
a)
(24) Universal bit holder
a)
(25) Screwdriver bit
a)
(26) Adapter
b)
(27) Hex key
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Commercially available (not included in the scope of deliv-
ery)

Technical Data

Impact drill

Article number
Rated power input
Max. power output
No-load speed
– First gear
– Second gear
Impact rate
– First gear
– Second gear
Rated torque
– First gear
– Second gear
Stall torque in accordance with EN 62841
– First gear
– Second gear
Speed preselection
Constant Electronic
1 609 92A 867 | (26.07.2022)
a)
a)
a)
a)
a)
a)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/vibration information

Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96 dB(A); sound power level
107 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
AdvancedImpact
determined according to EN 62841-2-1:
900 | 9000
Drilling into metal: a
3 603 A74 0..
Impact drilling into concrete: a
W 900
Screwdriving: a
The vibration level and noise emission value given in these
W 1 050
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
-1
min 50–1 180
pare power tools. They may also be used for a preliminary
-1
min 50–3 000 estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
-1
min 20 060
power tool is used for other applications, with different ap-
-1
min 51 000
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
Nm 1.6
working period.
Nm 0.5
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
Nm 50
This may significantly reduce vibration and noise emissions
Nm 19
over the total working period.
●
Implement additional safety measures to protect the oper-
●
ator from the effects of vibration, such as servicing the
Impact drill
Clockwise/anticlockwise rota-
tion
Rapid shut-off (KickBack Con-
trol)
Fully automatic spindle lock
(Auto-Lock)
Spindle collar diameter
Max. drilling diameter (first/
second gear)
– Masonry
– Concrete
– Steel
– Wood
Chuck capacity
Weight according to
EPTA-Procedure 01:2014
Protection class
(triax vector sum) and uncertainty K
h
2
= 6.5 m/s , K = 1.5 m/s
h
= 20 m/s
h
2
< 2.5 m/s , K = 1.5 m/s
h
AdvancedImpact
900 | 9000
●
●
●
mm 43
mm 20/16
mm –/18
mm 13/8
mm 40/25
mm 1.5–13
kg 2.6
/ II
2
,
2 2
, K = 1.5 m/s ,
2
.
Bosch Power Tools