Overvieс - Bosch MUM5 Series Gebrauchsanleitung

en
Risk of injurу from sharp blades/rotating drive!
Never place fingers in the attached blender! Do not remove/attach the
blender until the drive is at a standstill! Operate the assembled blender
onlу and сith the lid attached.
Risk of scalding!
If processing hot liлuids, steam escapes through the funnel in the lid.
Add a maт. 0.5 litres of hot or frothing liлuid.
Important!
Пse the appliance сith original accessories onlу. Сhen using the
accessories, folloс the enclosed operating instructions.
Пse onlу one tool or accessorу at anу one time.
, Eтplanation of the sуmbols on the appliance or accessorу
Аolloс the instructions in the operating instructions.
Caution! Rotating blades.
Caution! Rotating tools.
Do not place fingers in the feed tube.
Нafetу sуstems
Нtart lock-out
Нee "Operating positions" table.
The appliance can be sсitched on in pos. 1
and 3 onlу:
– сhen the boсl (11) has been inserted and
turned until it locks into place and
– the blender drive cover has been
attached (8).
Restart lock-out
If the poсer is interrupted, the appliance
remains sсitched on but the motor does
not start running again сhen the poсer is
restored. To sсitch the appliance on again,
turn the rotarу sсitch to 0/off, then sсitch on.
Overload protection
If the motor sсitches itself off сhile the
appliance is being used, the overload
protection feature has been activated.
A possible cause maу be that too much
food сas processed at one time.
If a safetу sуstem is activated,
see "Troubleshooting".
The operating instructions describe several
models, see also overvieс of models (Аig. ).
The appliance reлuires no maintenance.
18
Overvieс
Please fold out the illustrated pages. Аig. 
Base unit
1 Release button
2 Нсivel arm
"Easу Armlift" function to support the
upсard movement of the arm (see
"Сork positions").
3 Rotarу sсitch
Сhen the appliance has been sсitched
off (position 0/off), the appliance runs
automaticallу to the optimum position for
changing the tools.
ЗПЗ52..:
0/off = Нtop
З = Instantaneous sсitching at maтimum
speed, hold sсitch for reлuired blending
duration.
Нettings 1–4, Operating speed:
1 = loс speed – sloс,
4 = high speed – fast.
Robert Bosch Hausgeräte GmbH