Environmental Information - GUTMANN Mesa Montageanleitung

en
13. Insert the flaps (four) in the flap
mount. Start with the LEFT and RIGHT
ones. Pay attention to the reference
X
points ( ) for the installation (magnetic
contact). On the underneath, the flaps
have two notches on each side which fit
exactly into the flap mount.
14. Align the flaps as necessary, ensur-
ing equal clearance (the flaps are also
height-adjustable!)
16
X
15. Carry out a functional test!
For the recirculating air version, you
also need to install the motor module (a)
and the recirculating air grid (b) as
shown in the following exploded draw-
ing.
Disposal
Packaging
The packaging for the extractor hood is
recyclable. Cardboard and polyethylene
film (PE) are used as packaging materi-
als. These materials must be disposed
of in an environmentally compatible
manner in accordance with local regula-
tions.
Extractor hood
Your local authority will also be
happy to advise you on the environ-
mentally sound disposal of old
household appliances.

Environmental information

All models manufactured by GUTMANN
are identified in accordance with Euro-
pean Directive 2002/96/EC on waste
electrical and electronic equipment
(WEEE). This directive specifies the
framework for the EU-wide return and
disposal of used appliances. Please ask
your dealer for information about current
disposal methods.
We reserve the right to make technical
changes.