Instrument Repair; Dismounting; Dismounting Steps; Disposal - VEGA VEGAMET 381 Betriebsanleitung

Dismounting

7.3 Instrument repair

If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from
our homepage at www.vega.com under: "Down-
loads - Forms and certificates - Repair form".
By doing this you help us carry out the repair
quickly and without having to call back for needed
information.
Print and fill out one form per instrument
l
Clean the instrument and pack it damage-proof
l
Attach the completed form and, if need be, also
l
a safety data sheet outside on the packaging
Please ask the agency serving you for the
l
address of your return shipment. You can find
the respective agency on our website www.
vega.com under: "Company - VEGA world-
wide"
8 Dismounting

8.1 Dismounting steps

Take note of chapters "Mounting" and "Connecting
to power supply" and carry out the listed steps in
reverse order.

8.2 Disposal

The instrument consists of materials which can be
recycled by specialised recycling companies. We
use recyclable materials and have designed the
electronics to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE
directive 2002/96/EG and the respective national
laws. Pass the instrument directly on to a speci-
alised recycling company and do not use the
municipal collecting points. These may be used
only for privately used products according to the
WEEE directive.
Correct disposal avoids negative effects on hu-
mans and the environment and ensures recycling
of useful raw materials.
Materials: see chapter "Technical data"
32
If you have no way to dispose of the old instrument
properly, please contact us concerning return and
disposal.
VEGAMET 381