What Do I Do If - Seca 761 Bedienungsanleitung

9. WHAT DO I DO IF ...?

Malfunction
... the scale does not
show any weight?
... the scale does not
show any plausible
weight?
If you find faults or deviations during the function
check, first try to remedy the fault with the aid of the
section "What do I do if ...?".
CAUTION!
Bodily injury
If you find faults or deviations during the
function check which you are unable to remedy
with the aid of the section "What do I do if ...?",
you may not use the device.
– Have the device repaired by seca service or
an authorized service partner.
– You should also follow the instructions in the
section "Maintenance/Recalibration" on
page 40.
Cause/Remedy
The device is not ready for use
- Remove transport lock
• Before weighing pointer does not read "0"
- Adjust display
• Force shunt: scale is e.g. touching a wall or
patient is supporting his/her weight against the
wall.
- Move scale away from wall
- Use transport lock as wall spacer
- Ask patient to stand on the scale unaided
English
What do I do if ...? • 39