Safety Regulations - Matrix KS 200-1 Originalbetriebsanleitung

Important!
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage.
Please read the complete operating instructions
and safety regulations with due care. Keep this
manual in a safe place, so that the information is
available at all times. If you give the equipment
to any other person, hand over these operating
instructions and safety regulations as well.
We cannot accept any liability for damage or
accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, ire and/or serious injury.
Keep all safety regulations and instructions in
a safe place for future use.
Read the operating manual before
using the device
Wear ear protection
Wear safety glasses
Wear a dust mask
Wear protective gloves
Pull out the power plug before
conducting any maintenance work on
the device
SAFETY INSTRUCTIONS
Warning! When using electric tools, basic
safety precautions should always be followed
to reduce the risk of ire, electric shock and
personal injury, in-cluding the following.
Read all these instructions before attempting
to operate this product and safe these
instructions.
1. Keep work area clean
– Cluttered areas and benches invite injuries.
2. Consider work area environment
– Don't expose power tools to rain. Don't use
power tools in damp or wet locations. Keep work
area well lit. Don't use power tools in presence of
lammable liquids or gases.
3. Guard against electric shock
– Prevent body contact with grounded surfaces
(e.g. pipes, radiators, ranges refrigeratiors).
4. Keep children away
– Do not let visitors contact tool or extension
cord. All visitors should be kept away from work
area.
5. Store idle tools
– When not is use, tools should be stored in dry,
high, or locked-up place, out of the reach of
children.
6. Don't force tool
– It will do the job better and safer at the rate for
which it was intended.
7. Use right tool
– Don't force small tools or attachments to do the
job of heavy duty tool. Don't use tools for
purposes not intended: for example, don't use
circular saw for cutt- ing tree limbs or logs.
8. Dress properly
– Do not wear loose clothing or jewelry. They can
be caught in moving parts. Rubber gloves and
GB
11