Herunterladen Inhalt Inhalt Diese Seite drucken

Workplace; Electrical Safety - Matrix EJS 610-60 Evolution Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Table of contents
1. Description of symbols
2. Machine components
3. Proper usage
4. Safety instructions and warnings
5. Safety instructions
6. Special safety instructions
7. Working with the MATRIX Jigsaw
8. Maintenance and care
9. Technical data
10. Repairs
11. Environmental protection
1. Safety instructions and warnings
The equipment complies with the safety regulati-
ons required for electrical equipment.
Read through the instructions for use before star-
ting up the equipment.
Improper use can lead to personal injury and pro-
perty damage. Persons, who are not familiar with
the instructions, may not operate the equipment.
Keep the instructions for use in safe custody.
Children and youths are not permitted to operate
the equipment.
2. Description of symbols
Pay attention to all the signs and symbols shown
in these instructions and on your tool. Make a
note of these signs and symbols. If you interpret
the signs and symbols correctly, your work with
the machine will be safer and better.
Attention!
Please read operating instructions.
Wear safety goggles.
Wear ear protection.
Wear breathing apparatus.
Wear good quality, strong gloves.
3. Machine components (B1)
1. Locking button
2. On/off switch
3. Protective cover
4. Saw blade
5. Pendulum setting
6. Parallel Cutting Guide
7. Vacuum adapter
8. Electronic Stroke-Rate Pre-selection
9. Saw blade fastener
10. Hex wrench
11. Mitre angle setting
12.Saw table
4. Proper usage
The device is designed for sawing wood, metal,
ceramic, plastic, and rubber, allowing for the
right accessory.
The manufacture assumes no liability whatsoe-
ver for improper use or if the machine has been
tampered with.
Give equal attention to the safety instructions,
assembly and operating instructions as well as
prevailing accident preventions regulations.
5. General safety instructions

WORKPLACE

Keep your workplace clean and well lit at all
times to prevent accidents.
Do not use electric machines in the vicinity of
inflammable liquids or gases or in wet or damp
environments. If you fail to follow this instruc-
tion, there is a risk of fire or explosion.
Do not leave the machine running without
supervision.
Do not use the machine if you are tired or lack
concentration or your reactions are impaired
due to the consumption of alcohol or medica-
tion.
Inattentiveness can cause serious injuries.

ELECTRICAL SAFETY

The mains voltage must be identical with the
details on the machine's rating plate.
GB
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ejs 750 evolution

Inhaltsverzeichnis