Reely Deathwatcher Bedienungsanleitung Seite 40

Setting Rear Axle Camber:
For setting the camber, turn the upper transverse link
(A).
Because the upper transverse link has a left and right
hand thread at either end, the transverse link does
A
not need to be dismantled for the camber to be ad-
B
justed
In the axle spur there are several more suspension
points (B) for the upper transverse link. When the
wheel rebounds, the camber changes depending on
the installation position (e.g. stronger camber when
the wheel is pushed in).
40