Gossen DIGISIX 2 Bedienungsanleitung Seite 27

Contents
Preparation, Safety, Warnings, Notes
1 The functioning of the exposure meter
1.1 Preparation and self-test
1.2 Incident light and reflected light
1.3 Duration of read-out in display
2 The individual functions
2.1 Setting the film speed
2.2 Exposure measuring ambient light
2.2.1 Read-out of the values measured
2.3 Flash measurement (only DIGIFLASH 2)
2.3.1 Setting the sync speed (measuring time)
2.3.2 Measuring
2.3.3 Fill-in flashes
2.4 Taking a measurement outside the
measuring range
2.5 Contrast measurements
2.6 Setting correction values
2.7 Function TIMER
2.8 Watch/Alarm clock
2.9 Measuring temperatures
2.9.1 Min./Max. temperatures
3 Service and repairs
4 Technical data
GOSSEN Foto- und Lichtmesstechnik GmbH
The DIGISIX 2 - DIGIFLASH 2 is a small but smart
Page
GOSSEN exposure meter, with digital read-out, for
4
ambient light; the DIGIFLASH 2 has additional flash
8
function.
8
The exposure meter is made to exacting GOSSEN
9
calibration standards for high precision measure-
9
ments. The trendy styling and logical functioning
10
make it easy and comfortable to operate.
10
11
Key features:
11
12
 Incident and reflected light measuring mode
12
 Measuring of ambient light
12
 Measuring of flash light (only DIGIFLASH 2)
13
 µ P controlled
 Digital LCD display readout in 1/3 stop increments
14
 Contrast readout in 1/3 EV steps
15
 Storage of the measuring results
15
 Indication of all suitable combinations of shutter
16
speeds and f-stops
17
 Signal "range over" or "range under"
18
 Automatic battery check
19
 Countdown timer for long exposures
20
 Function Watch/Alarm clock
21
 Measuring temperatures
3