Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning - Conrad Grand PC2TV Wireless Bedienungsanleitung

Vga-tv-konverter
Inhaltsverzeichnis

Werbung

b) Récepteur AV
19
Connecteur femelle pour le bloc d´alimentation électrique fourni
20
Prise femelle Cinch « VIDEO OUT », sortie pour le signal vidéo FBAS
21
Connecteur femelle Cinch « AUDIO OUT-R », sortie pour le signal audio droit
22
Connecteur femelle Cinch « AUDIO OUT-L », sortie pour le signal audio gauche
23
Antenne « ANT », rotative
24
DEL power « RX »
25
Quatre diodes DEL pour l´affichage du canal actuellement actif (« CH1 », « CH2
», « CH3 », « CH4 »)
26
Touche « CH SET » pour commuter les canaux de transmission
7. Branchement
a) Utilisation comme convertisseur VGA TV sans radio-
transmission
Le convertisseur VGA TV transforme l´image VGA de la carte graphique de l´ordina-
teur en un signal vidéo « classique ». Celui-ci peut être émis comme signal FBAS,
SVidéo ou RGB selon la connexion dont dispose votre appareil audio vidéo.
N´utiliser qu´une des trois sorties pour la connexion d´un appareil audio vidéo.
Lorsque vous désirez brancher plusieurs appareils audio vidéo tels qu´un télé-
viseur sur la sortie FBAS, un deuxième téléviseur sur la sortie SVidéo, tenez
compte ici que le niveau de signal baisse. Non seulement la qualité de l´image
peut en être altérée mais il se peut aussi que le/les téléviseur(s) ne détecte(nt)
plus correctement le signal et que l´image n´est plus reproduite.
• Eteignez tous les appareils (ordinateur, moniteur, convertisseur VGA TV, téléviseur
etc.) et débranchez-les du secteur (retirer la fiche de la prise de courant).
46
Make sure that the shielding of the entire product is not damaged or destroyed.Make
sure during operation that any connected cables are not kinked or squeezed.
Never hold the power adapter unit with damp or wet hands.
The device may not be opened or taken apart. There are not parts to be maintained
by the user inside the product. Otherwise the warranty will be voided (CE).
Inspect the device for damages before each use.
If damage is found, the product may NOT be connected to the
power supply! This poses a deadly hazard (e.g. with damage to
the power adapter).

10. Maintenance and cleaning

Regularly inspect the mechanical safety of the product and the connected devices,
e.g. for damage to the housing or power adapter.
If it has been ascertained that safe operation is no longer possible, take the device
out of operation and secure it against accidental reactivation. Pull the power adapter
plug from the outlet!
It can be ascertained that safe operation is no longer possible, if:
• the device shows visible damage
• the device does not work any longer
• after longer storage under unfavourable conditions or
• after heavy transport stresses.
Make sure you observe the following safety instructions prior to cleaning or
servicing the product:
Before cleaning, maintaining, or repairing the device, it must be dis-
connected from all power sources; pull the plug from the outlet.
35

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis