Lipo Battery Charging; Ready To Start - Carson X4 Betriebsanleitung

LiPo Battery Charging

The quadcopter is equipped with a LiPo
battery
3.7 V 1-cell 380 mAh LiPo battery.
1. The LiPo battery supplied is in the fuselage of the Quadcopter.
Remove the LiPo battery from the model.
2. Connect the flight battery to the USB charger connection. The
LED of the charger lights up. When the battery is fully charged, the
LED turn off.
Never leave the battery and charger unattended during charging;
after charging disconnect the battery from the charger!

Ready to start

Now you can take off! But before it is important, that you read the complete manual.
1
Slide the ON/OFF knob upward. The Status-Led begins to flash.
3
Move the Throttle lever to the top and after back to lower position.
A short peep-signal confirming the binding between model and
transmitter. Your model is ready to fly now.
24 CARSON X4 Quadcopter SPY sport GHz 100% RTF 500507082
On/Off switch
2
Now you must switch on the quadcopter how it show the picture
and put it on a flat surface.
4
When you switch on the quadcopter, please put it on a flat surface
immediately, Herfor Hereby, you get a stable flight altitude.