ProFlow PF-SOF1,5-SIM Installations- Und Gebrauchsanleitung Seite 12

PROGRAMMING INSTRUCTIONS -
BASIC SETTINGS

Before entering the programming mode, make sure that
the appliance is in the service mode.
1. Press the scroll button; the display will show:
Language:English
Press the up or down

language.
2. Press the scroll button again; the display will show
(does not apply to Duplex Alternating!):
Set time:
Press the up button or down

time of day.
3. Press the scroll button again; the display will show:
Set Hardn.: XX°f
Press the up or down

of the incoming untreated water.
EN - English
ELECTRONIC CONTROL PANEL
button to set the
8:01
button to set the
button to set the hardness
Page 12