Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch PST 18 LI Originalbetriebsanleitung

Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture. There is a risk of explo-
sion.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rubber
while resting firmly on the workpiece. It is suitable for
straight and curved cuts with mitre/bevel angles of up to
45°. Note the saw blade recommendations.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off switch for on/off switch
(2) On/off switch
(3) Battery charge indicator
A)
(4) Battery

Technical data

Jigsaw
Article number
Stroke rate control
Pendulum action
Rated voltage
No-load stroke rate n
0
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
A)
– during operation and during storage
Recommended batteries
Bosch Power Tools
(5) Battery release button
A)
(6) Dust extraction hose
(7) Extraction outlet
(8) Saw blade storage compartment
(9) Base plate
(10) Pendulum action adjusting lever
(11) Hood for dust extraction
(12) Guide roller
(13) Base for Cut Control Cut Control
(14) Saw blade
(15) Viewing window for Cut Control Cut Control
(16) Shock protection guard
(17) Saw blade receptacle
(18) Worklight
(19) Handle (insulated gripping surface)
(20) Anti-splinter guard
(21) Guide for parallel guide
(22) Scale for mitre angles
(23) Screw
(24) Cut mark 0°
(25) Cut mark 45°
(26) Locking screw for parallel guide
(27) Parallel guide with circle cutter
(28) Circle cutter centring tip
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
rpm
mm
mm
mm
mm
°
kg
°C
°C
English | 17
A)
A)
A)
PST 18 LI
3 603 K11 0..
●
●
18
0–2400
20
80
12
5
45
1.9
0 to +45
−20 to +50
PBA 18 V ... V-.
PBA 18 V ... W-.
1 609 92A 49D | (04.07.2018)