Features - Philips AED Trainer 2 Bedienungsanleitung

2
M3752A AED TRAINER 2

Features

• The AED Trainer 2 provides simulated shock delivery. It has no
high-voltage capabilities, ensuring safety during training. IMPORTANT:
Remember handling safety when using working defibrillators that give a
high-voltage shock.
• The AED Trainer 2 is designed for use with the AED Little Anne and
Resusci Anne manikins with Laerdal Link Technology by giving
responses to pad placement on the manikins. It can also be used with
any other manikin. IMPORTANT: Realistic responses to pad placement
feature is only available when used together with the AED Little Anne or
Resusci Anne manikins with Laerdal Link Technology.
• The AED Trainer 2 can be used with an optional infrared remote
control. The remote control gives the instructor the ability to alter
training scenarios while in progress, to test student response.
• The AED Trainer 2 is pre-configured with 10 training scenarios that
simulate realistic sudden cardiac arrest episodes. These scenarios are
compatible with training programs developed by nationally and
internationally recognized responder programs.
• In addition, three custom scenarios can be created using the optional
Scenario Builder PC software. The software is available at no charge
via the internet at http://www.medical.philips.com/goto/Trainer2. Note
that this software also enables change of trainer language and
configuration settings.
• The AED Trainer 2 can be connected to the serial port of a PC
(generally labeled "COM1"). The optional PC software lets you
configure custom training scenarios, set-up various protocol
parameters and change language output. Connection to a PC serial
port requires a standard 1:1 9-pin D-sub serial cable.
• Check with your local medical director and Emergency Medical
Services provider for additional training requirements, protocols, and
materials.