Selecting Previous / Next Track; Starting / Pausing Playback; Auto Power Off; Operating Overview - Silvercrest SBTH 2.1 A1 Bedienungsanleitung

SilverCrest SBTH 2.1 A1

Selecting previous / next track


In playback mode, slide the multifunction button (2) briefly in the
direction to reach the start of the current track, and slide the multifunction
button (2) again briefly in the

In playback mode, slide the multifunction button (2) briefly in the
direction to reach the next track.

Starting / pausing playback

In playback mode, press
playback. The playback continues when the button is pressed again.

Auto power OFF

After approx. 10 minutes in standby mode without a connected device, the LED (3)
lights up orange once for a longer period and the headphones switch themselves
off automatically.

Operating overview

The most important operating steps are briefly summarized in the following table.
Switching on Bluetooth
function
Switching off Bluetooth
function
Pairing
16 - English
direction to reach the previous track.
the multifunction button (2) briefly to pause the
®
Slide switch (5) to the
The headphones connect directly to a previously
connected device within range. A confirmation of
the known device may be required.
®
Slide switch (5) to the "OFF" position.
Slide switch (5) to the
lights up blue, press the
briefly. The LED (3) then alternates between
flashing orange and blue.
position:
position. If the LED (3)
multifunction button (2)