Beyerdynamic AMIRON Bedienungsanleitung Seite 6

6
Turning on / off
The functions listed below refer to the Amiron wireless when it has already been paired
with a Bluetooth enabled device.
• Turning on:
Hold down the button
The LED will illuminate red once.
• Turning off:
Hold down the button
The LED will illuminate red once and then go out.
Pairing with the player
Before you use the Amiron wireless for the first time, you have to pair it with your mobile
phone or another Bluetooth enabled device. The pairing process may be different with
various players. Please refer to the appropriate manual of the player.
• When the Amiron wireless is turned off, press the button
the Bluetooth mode. The LED
• Activate the Bluetooth function on your player and, if necessary, search for new
devices.
• Select "beyerdynamic Amiron wireless" under the available devices in the Bluetooth
menu of your player and pair both devices. Each time when turning on, both devices
are paired automatically.
Pairing and clearing the list of players
If there are already several players in the list of your Amiron wireless and your Amiron
wireless cannot be paired with another new player, the list is full and should be cleared
so that the new player can be added.
This is how to clear the list:
• Hold down the button
so that the Amiron wireless will switch into the pairing mode and clear the list of
players simultaneously.
for approx. 2 seconds.
for approx 6 seconds.
will rapidly flash blue and red in turns.
of the turned off Amiron wireless for more than 10 seconds,
Amiron wireless – Headphones
for 6 seconds to start