Accessory; Water Collecting Tray - hot.com4 Combi Montage- Und Bedienungsanleitung

Accessory

Water collecting tray

The water collecting tray is available as an accessory and can also be retrofitted under a previously-
installed device.
Installation: Insert the two retaining brackets in the floor plate and fasten them on the floor plate with
the included screws (Fig. 7). Place the collecting tray on the retaining brackets and slide
it in (Fig. 8). For easier insertion, the guide rails under the collecting tray protrude slight-
ly at the rear.
Fig.7
Fig.8
28
Saunaheater - front
Retaining brackets
Water collecting tray
Floor plate