Wps Setup (Wi-Fi Protected Setup) (Mcs-838/Mcs-434/Mcs-Fs232 Only) - Pioneer MCS-838 Bedienungsanleitung

42 Connecting
En
WPS setup (Wi-Fi Protected Setup)
(MCS-838/MCS-434/MCS-FS232 only)
WPS connection setting
industry group for a function allowing settings
2
wireless LAN devices and encryption to be
made with simple operations.
This unit supports push-button configuration
and PIN code configuration.
PBC (Push Button Configuration)
Connection settings are made automatically
the simplest way of making the settings, and
PIN Input
Connection settings are made by inputting the
8-digit PIN code shown on the main display to
the access point to which you selected. Follow
the instructions shown in Connecting using
PIN code configuration on the right.
Setup] [Network]
1. Press HOME MENU.
The HOME MENU screen is displayed.
2. Use cursor buttons to select [Initial
Setup] and press ENTER.
The Initial Setup screen is displayed.
3. Select [Initial Setup]
[Wireless Setting]
press ENTER.
A confirmation screen is displayed.
4. Use / to select Yes, then press
ENTER.
The Wireless Setting screen is displayed.
5. Use / to select Auto, then press
ENTER.
The WPS (Wi-Fi Protected Setup) screen is
displayed.
6. Use / to switch between [ PBC] or
[ PIN] screens.
7. When connecting using PBC (Push
Button), on the [ PBC] screen use /
to select NEXT, then press ENTER.
point within 120 seconds.
8. When connecting using PIN confirm
the PIN Code on the [ PIN] screen. Use
cursor / to select NEXT, then press
ENTER.
9. Enter into the access point the PIN
Code that you confirmed in step 8
above.
The PIN Code input method differs
depending on the LAN device used. For
details, consult the operating instructions
accompanying your LAN device.
[Initial
[Interface] to [Wireless].
[Network]
[Next Screen] and