Connecting; Assemble The Speakers; Speaker Setup For Bcs-Sb616; Preparing The Speakers - Pioneer BCS-SB616 Bedienungsanleitung

Connecting

16

Assemble the speakers

Speaker Setup for BCS-SB616

Preparing the speakers

For subwoofer:
Use the supplied adhesive to attach four large pads
2
to the base of subwoofer.
For front speaker:
Assembling the speaker stands and securing your
front speaker.
1. Use the supplied adhesive to attach three small
pads to the base (bottom) of each speaker
stand.
Large non-skid pads
Small non-skid pads
If you decide not to use the speaker stands, use the
supplied adhesive to attach four small pads to the
base of the speaker.
Small non-skid pads
2. Attach the speaker stand bases to the speaker.
Attach both right and left speaker stands to the
rear of the speaker. The height of the speaker
stands can be adjusted in two levels; select the
height you prefer, and ix in position.
>
Caution
y Be careful not to tighten screws excessively.
y If excessive force is used to tighten screws,
the threads of screw may be damaged. Use
a middle-sized manual screwdriver during
assembly.
y Do not use power screwdrivers or oversized
screwdrivers that may exert excessive force
on the screws.
y Conirm that no foreign matter is stuck to
the stand or the speaker during assembly.
y If the unit is assembled with foreign matter
stuck between the stand and the speaker
the unit may not be assembled securely,
resulting in tipping or falling.