- For cursor moving by a choice of detecting use the button 1 «arrow downwards».
- For changing the level of detecting press the button «+1».
- For saving and an exit press the button "START".
Attention! New settings are saving during the further operation.
8.1 Adjustment of sensitivity UV detection.
Each pressing of the «+1» button increases level on 1. It is available to change it
in limits from 0 to 9, and value 1 matches to the highest sensitivity, and 9 – to the
lowest. 0-Detecting is disconnected.
If there is an error «Suspect UV Check again» during the counting increase level on
1. If counter passes banknotes with wrong ultraviolet detecting, reduce level on 1.
8.2 Sensitivity's adjustment of a banknotes thickness.
THICKNESS- level of optical density, "transparence" of banknotes in various states
can differ from each other very much by their density. By default optical level of den-
sity is set in average position. Also it is necessary to remember that in one batch
can be both new, and the worn out, greasy banknotes which differ on density from
new. By installation of high sensitivity level, the counter can recognize these ban-
knotes as suspicious.
Each pressing of the «+1» button increases level on 1. It is available to change it
in limits from 0 to 9, and value 1 matches to the highest sensitivity, and 9 - to the
lowest. 0-Detecting is disconnected.
If there is an error «Double notes Check again» during the counting make level on
1 more. If counter misses double banknotes, reduce level on 1.
8.3 The control's borders adjustment of banknotes width. WIDTH.
Each pressing of the «+1» button increases level on 1. It is available to change it
in limits from 0 to 9, and value 1 matches to the highest sensitivity, and 9 - to the
lowest. 0-Detecting is disconnected.
If you have set the highest sensitivity of width detecting, the counter can reject
strongly worn out banknotes, and banknotes with the bent edges or very old ban-
knotes, small size banknotes (small face values).
24