Sound Setting And Initializing Digital Piano; Function List - Classic Cantabile DP-50 Bedienungsanleitung

Sound Setting and Initializing Digital Piano

There are 11 functions to set sound in the setup mode.
Call up the setup mode.
Press SETUP button to call up setup mode . The LED display shows '---'
Select a desired function.
To select a function, press theDATA/TEMPOUPor DOWN button with holding down the SETUP button.
Function number will be shown on the LED display.

Function List

DISPLAY FUNCTION
F01 Main Voice Vol.
F02 Split Voice Vol.
F03 Layered Voice Vol.
Metronome
F04
/Demo Vol.
F05 Reverb Type
F06 Reverb Vol.
F07 E ect Type
F08 E ect Vol.
F09 Low EQ Level
F10 High EQ Level
F11 Initialize
Adjust value of the selected function.
Press the ENTER/PERCUSSION button with holding down the SETUP button.
The LED display shows a value of the selected function and you can adjust the value by using DATA/TEMPO UP or
DOWN button.
If you press both DATA/TEMPO UP and DOWN buttons, it automatically returns to the default value.
Hold the button for continuous decrementing or incrementing.
40
DESCRIPTION
Adjust the volume of the main voice.
Adjust the volume of the split voice.
Adjust the volume of the layered voice.
Adjust volume of metronome & demo music.
Select a reverb type.
r-0 (O ), r-1 (Room 1), r-2 (Room 2), r-3 (Room 3),
r-4 (Hall 1), r-5 (Hall 2), r-6 (Plate), r-7 (Shot Delay), r-8 (Long Delay)
Adjust reverb volume.
Select a e ect type.
00 (O ), 01 (Chorus 1), 02 (Chorus 2), 03 (Chorus 3), 04 (Chorus 4),
05 (Chorus 5), 06 (Delay 1), 07 (Delay 2), 08 (Delay 3), 09 (Flanger),
10 (Feedback 1), 11 (Feedback 2), 12 (Feedback 3), 13 (Feedback 4)
Adjust e ect volume.
Low frequency EQ gain
High frequency EQ gain
The digital piano goes to factory setting.
RANGE / (DEFAULT)
00 ~ 127 / (127)
00 ~ 127 / (127)
00 ~ 127 / (100)
00 ~ 127 / (100)
r-0 ~ r-8 / (r-5)
00 ~ 127 / (80)
00 ~ 13 / (00)
00 ~ 127 / (36)
- 06 ~ 00 ~ + 06 (06)
- 06 ~ 00 ~ + 06 (00)
-