Changing The Split Point; Reverb - Classic Cantabile DP-50 Bedienungsanleitung

Call up the Split mode.
To call up the split mode, press the SPLIT button. The lamp ashes and the split is set on and the LED
display shows current selected split voice.
The default voice is '07' ACOUSTIC BASS in the split mode.
Select the split voice.
Press a voice button to select a desired split voice during the split button ashes.
Volume of the split voice can be adjusted independently in the setup mode. (See the SETUP section on page 19.)

Changing the Split Point

You can set the point dividing the right and left keyboard ranges at any desired key position.
To assign new split point, hold down the SPLIT button and press a key.
The LED display shows split key's number.

Reverb

Reverb is an e ect that recreates the decaying re ections of a sound in a performance space, and
reproduces the special ambience of a concert hall.
REVERB ON/OFF
To turn on reverb, press the REVERB button. The lamp lights and
the reverb is set ON.
To turn o reverb, press the REVERB button again. The lamp turns o and the reverb is no longer activated.
Default is ON.
Reverb type and volume can be adjusted in the setup mode. (See the SETUP section on page 19.)
36
SPLIT (DEFAULT F#3 , KEY 33)