Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SWINGING UNIT
12) Swinging unit and all functions
are described and
shown below (fig.13.):
• In order to turn the bouncer on - press button - POWER.
• Buttons „-" i „+" (1) are used to control swinging speed of the bouncer.
Press „+" to incresase the swinging speed, „-" to decrease swinging speed.
One of 4 speeds can be set. Because of the age of babies - speeds does not
differ much. Current speed is indicated by LED light.
• Music button (2) can be used to turn the music ON and OFF.
• Music/Volume change button (3) can be used to changecurrent music
(quick press) lor to change the sound volume level (press the button for a
longer time).
• Timer is set by pressing button (4). It is possible to set one of the 3 possible
timers - 10, 20 and 30 mins. Current timer set is indicated by LED light.
Deafult set - timer is turned OFF (non of the LED lights shine) after turning
ON bouncer will swing until the power is turned OFF.
• Move detector button (5) after turning this function on - bouncer will
be automatically start swinging after detecting baby movement. Move
detector option is indicated by LED light next to the button.
• Battery chamber is located on the bottom of base support front tube.
• Unscrew battery cover with phillips screwdriver. Remove cover and place
4 xLR20 batteries into the battery chamber (fig.12.)
• Close the battery chamber and tighten the screw.
ALL ACTIONS ASSOCIATED WITH BATTERY REPLACEMENT MUST BE
PERFORMED BY AN ADULT
1. Insert the batteries into the chamber indicated on the packaging or the
product itself. In order to insert the batteries to the chamber, unscrew
the securing cover and place the batteries in line with the polarity. After
the batteries are inserted, screw the cover back on.
18
Fig.12
Electric Bouncer
1
1
2
Fig.13
4
3
5
Werbung
Inhaltsverzeichnis
