Intended Use; Package Contents; Safety Instructions - Conrad CE3 Bedienungsanleitung

G
O P E R A T I N G I N S T R U C T I O N S
Colour Reverse Driving Camera in
Number Plate Holder CE3
Item no. 84 04 61

Intended use

The number plate camera is a high-quality CCD camera that is integrated into a robust number
plate holder. The camera is placed above the number plate, can be swivelled downward and
can enable the recognition of obstacles when driving backward. Four infrared LEDs are built
into the camera to improve night vision. The camera image can be mirrored left/right via jumper.
To operate the number plate camera, a monitor with the PAL system and RCA video input is
also required, along with diverse installation material.
☞
This product is developed only for German EU number plates of size 520 x 110 mm.
Please check whether your number plate fits in the holder before ordering or install-
ing. EU number plates from Austria, for example, are 10 mm taller and do not fit in
the number plate holder.

Package Contents

• Number plate camera
• DC extension cord (ca. 50 cm)
• Jumper for image mirroring
• Operating Instructions
Operation and installation elements
1
5
1 Number plate holder with
integrated number plate camera
2 Number plate camera
3 Infrared LEDs
4 Locking screws for the camera
5 Clamping separators
☞
You can find suitable installation material and accessories in our catalogues at www.
conrad.com

Safety Instructions

The warranty will be void in the event of damage caused by failure to observe
m
these safety instructions! We do not assume any liability for any consequen-
tial damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. In such cases,
the warranty will be null and void.
• The product must not be modified or converted, as not only the CE approval will
become void but also the warranty will be void.
• The system components may not be placed under any significant mechanical
loads.
• The number plate camera is built according to the German DIN norm in protection
class IP67 and is thus protected against sprayed water. This system construction
enables use outside a motor vehicle. To avoid damage to the camera by hose water
getting into it, cleaning the camera with cleaning devices that use pressurized water
(steam jet) is not permitted. The warranty will be void in cases of noncompliance!
www.conrad.com
2
3
4
6
10
9
8
6 DC connection cable
7 Video output
8 Control cable for image mirroring
9 Jumper for image mirroring
10 Cable seal
• When installing and operating the system, always observe the applicable motor
m
vehicle regulations and road traffic regulations. Inform yourself before driving in
a foreign country whether the mounting, mounting location and operation of the
number plate camera is permitted and does not violate applicable laws or ordi-
Version 12/13
nances.
• Modifications to the vehicle which are made necessary through the installation of
the system or other components must always be carried out in such a manner that
neither the traffic safety nor the designed stability of the car is impaired.
• With many vehicles, the MOT will be void if you cut out a section of the sheet
metal. Find out ahead of time from the vehicle manufacturer or a specialist shop.
• No components may be installed within range of the fully-expanded airbag, as this
could lead to injury to the vehicle's occupants in the event of an accident.
• If you are in doubt about where to install the device, consult your mechanic.
• Before drilling, make sure that this will not lead to any damage to electric cables,
brake leads, the fuel tank or similar.
• Only the 12V/DC direct current power supply may be used as a voltage source.
Never connect the system to any other power supply.
• Extra care should be taken when starting up the system. Therefore, please follow
the operating instructions carefully.
• Improper mounting and cabling of the number plate camera can lead to damage
to the electrical system of the vehicle, including important computer and operating
systems. This could lead to an accident (e.g. electric shock) or fire, which could
result in material damage and/or serious personal injury. We recommend having
the mounting and connection done by a qualified automotive electrician.
• Wireless devices such as WLAN routers, Bluetooth devices or mobile communica-
tion devices can have a disruptive influence on the operation of the monitor. If this
is the case, you will see rolling lines, blurry images or static images on the monitor.
• Make sure that the connection cables are not pinched or damaged by sharp edges.
• Contact a specialist if you have any doubts about how the system functions, about
the safety aspects or how to connect the system.
• If light falls directly on the camera, the result may be that the surroundings are not
shown clearly. In fluorescent light, the monitor may flicker.
• Dirt, rain or snow can limit the function of the camera.
• The use of the number plate camera as a reverse driving video system does make
backing into a parking space easier, but it does not release you from your obliga-
tion to take care. Please observe the road traffic regulations (StV0), (German road
traffic regulations). The operation at a speed of more than 3 km/h is at your own
risk and not recommended. Otherwise there is a very great danger of an accident.
• A reverse driving system should increase safety and protection. It is not intended to
replace other safe driving habits. Precise control and looking around before back-
ing up is recommended. This applies especially in the vicinity of pedestrians or in
areas with traffic that crosses the direction of reverse travel as well as for use in
darkness or glaring light. The device's method of operation may mean that certain
obstacles are not detected, or are not reliably detected.
7
• Colours of the surroundings that are shown on the monitor - especially in darkness
- deviate from the actual colours of the surroundings.
• Be sure to follow the safety instructions of the tool manufacturer when using tools
to install your system.
• When installing the system, take into consideration the risk of accident which can
arise from components being torn away in the event of an accident. Therefore,
you should secure each component in a place where it will not pose a risk to pas-
sengers.
• The number plate camera must not obstruct the vehicle's rear lights, the number
plate, or any other part of the vehicle's equipment, and it must be flush with the edge
of the vehicle.
• This installation manual does not apply for all vehicle types. Due to the huge
number of automotive makes and models, the following installation steps should
serve as general guidelines. For vehicle-specific questions, please consult your
vehicle manufacturer or a mechanic who specializes in your car model. Check
the motor vehicle laws in a given country to find out whether the installation, the
installation location and the use of this system is permitted.
• Keep the unit out of the reach of children. It is not a toy.
• Do not leave packaging materials unattended. It may become a dangerous
plaything for children.
• Please also observe the additional safety instructions in each individual section of
these instructions.
• If you have any questions, which are not answered in this manual, please contact
our technical service or another specialist.