Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
g)
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
4. Careful Handling and Use of Power Tools
a)
Do not overload the tool. Use the power tool designed for the work that you
are doing. You work better and safer in the specified performance range if you use
the suitable power tool.
b)
Do not use power tools whose switch is defective.
switched on or off is dangerous and has to be repaired.
c)
Remove the plug from the socket before carrying out tool settings, changing
accessories or putting the tool away. This precautionary measure prevents
unintentional starting of the tool.
d)
Store unused power tools so that they are inaccessible to children. Donot
let persons use the tool who are not familiar with it or who have not read
these instructions. Power tools are dangerous when they are used by inexperienced
persons.
e)
Take proper care of your tools. Check whether the moving parts
functiontrouble-free and do not jam, whether parts are broken or damaged
so that the tool function is impaired. Have damaged parts repaired before
using the tool. Many accidents have their origin in power tools that have been
maintained badly.
f)
Use the power tool, accessories, insert tools, etc. in accordance with these
instructions and in a fashion specified for this special tool type. Take the
working conditions and the activity to be carried out into consideration. The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
a)
Have your tool repaired only by qualified specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b)
If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
ATTENTION! EXPLOSION HAZARD!
Do not store materials with a flash point below 21°C in the basic device!
Only store materials in the basic device in containers that close airtight!
Remove any material that may have leaked into the basic device immediately
and allow the device to dry completely before using it! Do not store materials
contained solvents in the basic device during operation!
18
A power tool that cannot be
W 867 E
Werbung
Inhaltsverzeichnis
