How To Install The Home Station - LG VR64701LVMP Bedienungsanleitung

HOW TO INSTALL THE HOME STATION

How to Install the Home Station
1. Position the home station against a wall on hard level fl ooring to
prevent sliding during docking.
Remove objects within 1.5
2 to the front.
2. Plug the power cord into an outlet.
Wrap the remaining power cord around the fi xed hook on the
back side of the home station or along the wall surface so that
the travel path of the Robot Cleaner will not be obstructed.
3. Fix the home station against the wall so that it does not move.
Then turn on the power switch.
4. When the remote controller is not used, store it in the remote
controller holder on the home station.
Tip
• Always keep the home station plugged in when in use. If the home station is not plugged
in, the Robot Cleaner will not return to the station to charge automatically.
< Warning > Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug,
if it is not working properly, or if it has been damaged or dropped. To avoid electrical
hazards, the cord must be replaced by LG Electronics, Inc. or a qualified service
person.
14
to the right and left side and within
1.5 
2 
1.5 
Fixing hook of power cord