Location Search Function - LG VR64701LVMP Bedienungsanleitung

LOCATION SEARCH FUNCTION

The Robot Cleaner remembers its location while cleaning.
If the user moves the Robot Cleaner while it is operating, it will search for the location it
was moved from by using its navigational location search function before continuing to
clean.
※ The navigating function will be activated after the
Robot Cleaner adequately recognizes the cleaning
environment.
Manual Relocation.
1. With the power off, locate the Robot Cleaner near
the location where it was originally moved from.
※ The location search is more effective when the
Robot Cleaner is closer to the location where it
was moved from.
※ If it is moved from its original cleaning position
by more than 1
the Robot Cleaner to search for it's previous
location.
2. Press the START/STOP button on the Robot Cleaner or START button on the remote controller.
Robot Cleaner will then start the location search function along with an audio guide.
※ When the location search is successfully completed, it will continue cleaning from where it was moved.
If the location search fails, it will start again from the beginning.
Location of incident
Tip
• If the power is turned off after the location search function is set, the location search function
will be canceled.
• Location search will be more effective when the Robot Cleaner is closer to the location where
it was moved from.
26
, it becomes diffi cult for
To fi nd exact location,
Zigzag please step away from the
Change location
Robot Cleaner.
When the location search
function is activated, the
cleaning mode of the status
indicator will fl ash
1
1
Location of incident
Zigzag