Overview - LG VR64701LVMP Bedienungsanleitung

Install the home station. (p14)
1
Insert the power cord plug into an outlet and locate the
station against a wall. If power is not supplied to the
home station, the Robot Cleaner will not charge.
Turn on the power supply of the Robot
2
Cleaner. (p15)
Turn ON the power switch on the rear-left of
Robot Cleaner, and press the 'START/STOP'
button on the top.
※ If the power supply is not turned on, refer to
page 15.
Check the dust bin.
3
Check the cleanness of the dust bin before starting
cleaning and close the dust bin compartment cover on
the main unit.
Start cleaning. (p16)
4
Press the START/STOP button once again while
the Robot Cleaner is turned on. You will hear an
announcement of the cleaning mode and cleaning will
begin once the Robot Cleaner has reversed and turned
around.
Automatic charge. (p17~18)
5
The Robot Cleaner will self-diagnose and automatically
return to the home station to recharge before the
complete discharge of the battery. It takes approximately
three hours to charge the battery.
Use the cleaning mode and auxiliary functions.
6
(p19~25)
Use the buttons on Robot cleaner and Remote
Controller to use each cleaning mode and supporting
features
Cleaning modes include ZigZag, Cell by Cell, Spot, My
space, and Repeat cleaning; supporting features include
Manual, Scheduled and Microfi ber Mop cleaning.
< Warning > When the Robot Cleaner is operated with the dust bin compartment lid left open,
it can cause an injury or serious damage to the product.

OVERVIEW

1.5 
2 
1.5 
13