Turbo Mode; Repeat Mode; Learning Mode - LG VR64701LVMP Bedienungsanleitung

AUXILIARY CLEANING MODES

Turbo Mode

Pressing the 'Turbo' button on the Remote Controller
or main unit will activate 'Turbo' mode, with a voice
message.
While in 'Turbo' mode, pressing the same button will
cancel 'Turbo' mode, with a voice message.
In 'Turbo' mode, Robot Cleaner runs more intensely
for a powerful clean. Turbo mode will reduce the
battery duration.
※ <Turbo Mode (Floor Master Function)>
'Turbo mode' will automatically operate when the
Robot Cleaner cleans carpets.

Repeat Mode

Pressing 'Repeat' button on Remote Controller will activate 'Repeat'
mode, with a voice message.
While in 'Repeat' mode, pressing the same button will cancel 'Repeat'
mode, with a voice message.
In 'Repeat' mode, Robot Cleaner repeats the cleaning in progress until
the battery runs out without returning to the home station.

Learning Mode

The Robot Cleaner is capable of memorising the
cleaning environment through its Learning mode for
an intelligent cleaning operation.
※ 'Learning Mode' is available only when the
machine starts cleaning from the Home Station.
Tip
• Precautions with Smart Operation
- This Learning mode enables memorizing locations with obstacles to help bypass them.
Robot Cleaner memorizes every aspect of the environment it was subjected to from when it
started cleaning from the Home Station to the moment it finishes its course.
- Robot Cleaner learns new conditions again when the location of Home Station has been
changed.
- If the learning mode is accepted, a voice message will say "Environment has been studied
by learning process."
22