Renkforce DL-PAR105 SMD LED-Spot Bedienungsanleitung Seite 41

AUTO RUN
Activates the automatic effects.
The buttons +/- or the number buttons (0-9) select the desired automatic effect (AU01-15).
The button SPEED and the buttons +/- or the number buttons (0-9) set the effect speed.
FADE MODE
Activates the fade effects.
The buttons +/- or the number buttons (0-9) select the desired fade effect (FA00-FA09).
The button SPEED and the buttons +/- or the number buttons (0-9) set the effect speed.
SPEED
Sets the desired effect or strobe speed.
This is adjusted with the buttons +/- or by direct input of a number via the keypad 0-9).
COLOR MODE
Activates operation with pre-programmed colours.
The buttons +/- or the number buttons (0-9) select the desired colour pre-setting (Co01-Co32).
The button SPEED and the buttons +/- or the number buttons (0-9) set the strobe speed.
+ and -
These buttons are used to set different values, e.g. for the speed setting for effects, strobe, etc.
W/A
This button has no function.
R / G / B
These buttons activate operation with a manual colour setting.
Set the brightness of the individual colours by pushing the desired colour button (R, G or B) and adjusting
the brightness for this colour with the buttons +/- or the number buttons (0-9).
The button SPEED and the buttons +/- or the number buttons (0-9) set the strobe speed (FS00-
FS15).
41