Technical Data; Intended Use - Crivit 26235 Bedienungsanleitung

GB
FLOOR PUMP
Instruction Manual
Introduction ..............................................................5
Intended use . ............................................................5
Package contents . ....................................................5
Technical data . .........................................................5
Attention safety instructions . ....................................5
Initial use of the floor pump ....................................6
Adapter.....................................................................6
Cleaning & care instructions . ..................................6
Disposal . ...................................................................6
Warranty ..................................................................6
Warranty terms ........................................................7
Distributor .................................................................7
Service address .......................................................7
Introduction:
Congratulations!
With your purchase you have chosen a high-
quality product. Make yourself familiar with the
product before starting to use it. Carefully read the
following instruction manual. Use the product only
as described and only for the specified areas of
application. Keep this instruction manual for future
reference. When transferring this product to third
parties, also include all documents.
Symbols in this instruction &
installation manual:
!
This symbol indicates a risk of injury.
!
This is how additional information is ear-
marked.
!

Intended use:

This floor pump is suitable for inflating all conven-
tional bicycle tyres. Other uses or modifications to
the product are considered non-intended usage
and can lead to risk of injury and damages. The
distributor bears no liability for damages result-
ing from non-intended usage. The product is not
intended for commercial use.
Package contents:
1 x floor pump
1 x metal adapter for balls,
2 x plastic adapters for air mattresses, inflatable
toys, etc.
1 x instruction manual

Technical data:

Type: Floor Pump
IAN 285656
ITEM NO: 26235
Monz-Nr. PO30000238
Nominal pressure: 7 bar / 100 PSI
Maximum allowable pressure: 8 bar / 116 PSI
Displacement: 370 ml / 370 cm³
Pressure hose length: 100 cm
Production date: 2017
Warranty: 3 years
!
Attention safety instructions!
ATTENTION! RISK OF DEATH AND
INJURY.
Keep packaging material away from children.
There is a risk of suffocation and other injuries!
- You can inflate all bicycle tires up to the floor
pump's indicated maximum allowable pressure
(max. 8 bar / 116 PSI) or to the tyre manufac-
turer's indicated maximum tyre pressure. This
can usually be found on the tyre wall. The indi-
cated maximum values may not be exceeded at
any time.
Warning! Risk of injury through explosion
if maximum permitted pressure values are
exceeded.
- Defective or damaged air pumps may no
longer be used due to risk of injury. Defective
Floor pumps must be properly disposed of.
Repairs are not possible.
Warning! Damaged floor pump, hose,
adapter or faulty connectors cause risk of
explosion.
- Due to the high operating force and the risks
associated with this, the product is not suited for
use by children or persons with physical and/or
mental disabilities.
Warning! Please note that the pump
plunger and pump cylinder become very
hot over longer periods of pumping due to the
friction between them. For this reason, you
should only grasp the floor pump on the pump
(A1 / A2)
5