Technical Data - Lupine Wilma R Bedienungsanleitung

9

Technical data

Weight:
Wilma lamp: 120 g
Wilma R lamp: 120 g
Wilma 7 with battery: 360 g
Wilma R 7 with battery: 360 g
Wilma R14 with battery: 560 g
Wilma X 7 with battery: 430 g
Wilma RX 7 with battery: 430 g
Wilma RX 14 with battery: 630 g
Light output: Runtime:
28 W 3200 lumen
23 W 2700 lumen
19 W 2300 lumen
14 W 1800 lumen
10 W 1350 lumen
7 W 1000 lumen
5 W 750 lumen
3 W 450 lumen
1.5 W 225 lumen
0.3 W 45 lumen
Battery runtime varies according to battery age and condition,
as well as ambient temperature.
Charging time:
Wilma 7/X7: 5 h 30 min.
Wilma R 7/X7: 5 h 30 min.
Wilma R 14/X14: 6 h 30 min.
Lens beam angle:
26°
50 Wilma
Wilma R 7/X7: Wilma R 14/X14:
Wilma 7/X7:
1 h 45 min. 3 h 20 min.
1 h 45 min.
2 h 4 h 10 min.
2 h
2 h 30 min. 5 h
2 h 30 min.
3 h 20 min. 6 h 45 min.
3 h 20 min.
4 h 45 min. 9 h 30 min.
4 h 45 min.
6 h 45 min. 14 h
6 h 45 min.
9 h 30 min. 19 h
9 h 30 min.
16 h 32 h
16 h
31 h 63 h
31 h
150 h 310 h
150 h
Default setting
Battery capacity; nominal voltage:
Wilma 7/X7: 6.6 Ah 7.2 V Li-Ion
Wilma R 7/X7: 6.6 Ah 7.2 V Li-Ion
Wilma R 14/X14: 13.2Ah 7.2 V Li-Ion
Operating temperature:
-25 °C – +70 °C
Micro Charger:
Input voltage: 12 – 14 V =,>= 2 A from power
supply or or 12 V charging cable
Charging current: up to 2 A
Compatible batteries: Li-Ion 7.2 V
Display: charging control via three LEDs
Terminals: polarity-protected input and
output terminals
Contains:
FCC ID: QDS-BRCM1078
IC: 4324A-BRCM1078
Lumens:
lm (Lumens) = Unit of luminous flux
Usually differentiated in measured and cal-
culated values. Calculated values often differ
considerably from the actual light output.
Our lumen values are measured in our own
calibrated integrating sphere.
The measurement takes place after 30 se-
conds, the so called ANSI method.
Charger Wiesel:
Input voltage: 100 – 240 V~, 50 – 60 Hz
Charging current: up to 1.2 A
Compatible batteries: Li-Ion 7.2 V
Protection class:
IP68
Measurement of light output
Wilma
9
51