Safety Regulations; Layout; Items Supplied; Intended Use - EINHELL 15.441.32 Originalbetriebsanleitung

Anl_Schweissbrenner_Set_SPK7:_
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.

1. Safety regulations

Be sure to observe the safety instructions for your
welding set.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1/2)
1. Hose package
2. Protective cap, long
3. Ceramic nozzle
4. Rotary valve for gas passage
5. Handle
6. Quick-release connector plug
7. Gas connector
8. Contact pipe
9. Clamp sleeve
10. Tungsten electrode
11. Protective cap, short
12. Shielding gas hose
13. Hose clips
14. Adapter
12.08.2011 8:36 Uhr Seite 9

3. Items supplied

Take all parts out of the packaging and check that
they are complete.
TIG welding torch set
6 x ceramic nozzles (2 x size 4; 2 x size 5;
2 x size 6)
3 x clamping sleeves (2 x 1.6mm; 1 x 2.4mm)
2 x tungsten electrodes (1.6 x 73mm)
Adapter
Original operating instructions

4. Intended use

The TIG welding torch set is designed for TIG
welding (tungsten inert gas welding) in combination
with the appropriate welding set and shielding gas.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Hose package length:
Clamping sleeve diameter: 1.6/2.4 mm
Ceramic nozzles: Size 4/5/6
GB
4 m
9