Chapter 7 Handling - X4-TECH A-1000 Bedienungsanleitung

Function of the keys
(1) Power button
This button is used to swtich off the
HiFi system, alternately to place the
system on standby
In order that all devices making up
the HiFi system can be switched on
and off by remote control, all devices
should be connected to the cinch
leads.
() BAND / MEMO SCAN / MEMO HOLD
buttons
Buttons for opeation of the radio.
BAND changes the receiver from
AM > FM > AM ...
MEMO SCAN plays the stations
saved.
MEMO HOLD switches the MEMO
SCAN function off and holds the sta-
tion presently heard.
() VOLUME control
Volume control louder/quieter
(4) EQ SOUND button
Recalls the varying equalizer sound settings.
ROCK > JAZZ > DISCO > CLASSIC > FLAT
(5) EQ USER button
Recalls the varying user settings.
A > B > C > D > E
(6) Drive function buttons for the CD player
These buttons have the same function as the buttons on the CD player.
(7) Input selection buttons on the amplifier
These buttons have the same function as the buttons (9 – 13) on the CD player.
48 Chapter 6 Remote control
2 2
MEMO MEMO
PHONO BAND
SCAN HOLD
VOLUME
TUNER
3 3
EQ
TAPE USER SOUND
7 4 4
AV1/AV2 5 5
CD
6 6
POWER
1
Handling
› Never plug the power plug into a mains socket immediately after the device was taken from a
cold to a warm environment. The condensation water created thereby may damage the device.
› Allow the device to reach room temperature before connecting it. Wait until the condensation
water has evaporated.
› Never pull the mains plug by pulling the cable from the socket. Always only use the thus pro-
vided grip area.
› Remove the mains plug from the electrical outlet if the device is not in use for a longer period
of time.
› For safety reasons always pull the mains plug from the socket during a thunderstorm.
› Do not listen to excessively loud music for long periods of time. This may damage your hearing.
7
49
Chapter 7 Handling