Remote Control; Inserting Batteries / Replacing Batteries; Function Of The Keys - Renkforce A-1000 Bedienungsanleitung

Remote control

The main functions of the amplifier and other devices of the Renkforce HiFi series can be controlled from the sofa
with the system remote control included.

Inserting batteries / replacing batteries

Keep batteries out of the reach of children.
Batteries are special waste and have no place in the household waste.
When installing the batteries, make sure to pay attention to the correct polarity.
Remove the batteries if the device is not used for a longer period of time.
Do not leave the batteries lying around in the open; there is the risk that they will be swallowed
by children or pets. If swallowed, consult a doctor immediately.
Make sure that batteries are not short-circuited or thrown into fire. They may not be re-charged.
There is a danger of explosion.
Leaking or damaged batteries can cause chemical burns to skin when touched, use protective
gloves.
• Slide the battery compartment cover on the back upwards and take it off.
• Insert two new 1.5V mignon batteries (AA) in the battery compartment paying attention to the polarity. The correct
polarity is stamped in the bottom of the battery compartment.
• Replace the battery compartment cover.
• When the range of the remote control deteriorates or the remote control ceases to function properly, batteries
should be replaced as described above.
• In order to ensure long battery lifetime, use alkaline battery types only.
• Batteries with varying states of charge or from different manufacturers should never be mixed.

Function of the keys

(1) Power button
This button is used to swtich off the HiFi system, alternately to place the system on standby.

In order that all devices making up the HiFi system can be switched on and off by remote control, all
devices should be connected to the cinch leads.
39