Setting Up; Inserting The Batteries Into The Remote Control - Renkforce 2521586 Bedienungsanleitung

8. Setting up

When selecting the setup location, take the room layout into consideration (e.g. location of the nearest socket).
Avoid proximity to direct sunlight, vibrations, dust, hot and cold temperatures and dampness. The device must not be
placed next to powerful transformers or motors.
The device must be operated on a stable, level surface. There must be enough space around the device for
air to circulate, otherwise heat will not dissipate properly. Only place the device on smooth, level surfaces
(not carpets or other uneven surfaces). Do not cover the ventilation slots. Failure to observe these instruc-
tions may damage the device.
Do not drill holes or screw extra screws into the device. This will damage the interior components and may
cause a fatal electric shock.
Ensure that the device is placed on a stable surface to prevent it from falling off and causing injury.
Given the variety of paints and varnishes used to coat furniture, it cannot be ruled out that the device feet
could leave visible traces on furniture due to a chemical reaction. Do not place the device on top of valuable
furniture without appropriate protection.

9. Inserting the batteries into the remote control

You can control the amplifier functions conveniently from the distance using the included IR remote control.
Keep batteries out of the reach of children. Always ensure that the batteries are inserted in the correct
polarity.
Remove the batteries when you do not plan to use the remote control for a prolonged period. Do not leave
batteries lying around, as they constitute a choking hazard for children and pets. Seek immediate medical
attention if a battery is swallowed.
1. Slide the battery compartment cover off the remote control.
2. Insert two new 1.5 V micro-batteries (AAA) into the battery compartment. Pay attention to the polarity markings on
the bottom of the battery compartment.
3. Slide the cover back onto the remote control.
4. Replace the batteries when the range of the remote control deteriorates or the remote control ceases to function
properly.
5. Use alkaline batteries to ensure a longer battery life.
6. Never mix old and new batteries or batteries from different manufacturers. Do not mix non-rechargeable batteries
with rechargeable batteries.
25