Operation - Renkforce A-1000 Bedienungsanleitung

Operation

1
O
2
4
6
8
-10
18 17 16 15

Please note that sound controls that are turned up very high already require very high performance from
the amplifier even at medium value and can easily oversteer it. This results in distortions that may
damage the loudspeaker.
In case of high volumes and/or highly turned up sound controls, check for distortions and turn down the
volume control or the sound controls immediately to prevent damage to the loudspeakers.
(1) POWER button
This button switches the amplifier on and off.
Position „ON" > the device is switched on; „OFF" > the device is switched off.

The amplifier can only be switched on and off with the remote control by pressing the button POWER
(1) When switched off, the device is placed in standby mode. The STANDBY indicator (18) is lit up in
this case.
(2) Indicator FUNCTION
This indicator shows the chosen audio input.

Whenever the volume settings are changed, this indicator shows the volume level After a short period,
the indicator returns to show the chosen audio input.
O
2 2 2
4 4 4
6 6 6
8 8 8
10 -10 10
+ +
14 13
2
12 11 10
5
3 4
9 8 8
6
7 7
35