C) Connection Of The Control Lines For The Remote Control; D) Connecting The Power Supply; Mains Connection - Renkforce A-1000 Bedienungsanleitung

c) Connection of the Control Lines for the Remote Control

If you connect any other devices of the Renkforce HiFi series to the amplifier, you can remote-control these
devices via the system remote control.
For this, the control sockets of the individual devices must be connected to the control sockets of the am-
plifier. The control lines are enclosed with the individual devices.
• Connect the control socket of the equalizer to the control socket REMOTE SYSTEM EQ at the rear of the
amplifier.
• Connect the control socket of the tape recorder to the control socket REMOTE SYSTEM TAPE at the rear
of the amplifier.
• Connect the control socket of the tuner to the control socket REMOTE SYSTEM TUNER at the rear of the
amplifier.
• Connect the control socket of the CD player to the control socket REMOTE SYSTEM CD at the rear of the
amplifier.
d) Mains Connection
Before plugging in the mains plug, ensure that the device voltage indicated at the device cor-
responds to the available mains voltage. Do not connect the device if the indication does not
correspond to the available mains voltage. Wrong supply voltage will cause serious damage.
Be careful when handling mains cables and mains connections. Mains voltage may cause po-
tentially fatal electric shock.
The mains socket to which the device is connected must be easily accessible so that it can be
separated from the mains voltage quickly in case of an error.
The amplifier and all connected devices must be switched off when the power supply is con-
nected.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Make sure that all electrical connections and connection cables between the different devices
and any extension cables comply with the regulations and the operating instructions. If an ex-
tension line is used, ensure that it is designed for the respective load.
• Connect the mains plug of the amplifier to a socket (230 V/50 Hz) of the public mains supply.
32