Intended Use; Explanation Of Symbols - Renkforce A-1000 Bedienungsanleitung

Intended Use

The Renkforce HiFi amplifier A-1000 is used to amplify low-level audio signals in home audio systems. It is connected
between the signal source to be amplified and the loudspeakers.
The amplifier may only be driven by a low-level audio source.
This product is only approved for connection to 230V~/50Hz alternating current.
It can only be used in closed rooms, and therefore not outdoors. Contact with moisture, such as in bathrooms, must
be avoided.
Any use other than that described above could lead to damage to this product and involves the risk of short circuits,
fire, electric shock, etc.
The product must not be modified or converted, and the casing must not be opened.
Take note of all the safety instructions in these operating instructions!

Explanation of Symbols

The lightening symbol in a triangle warns you against unprotected live components or elements inside
the housing or „live" connection points. Coming into contact with these components or connection
points may be fatal.
Cables connected to such connection points may only be connected by an expert or you have to use
ready to connect cables.
The device contains no parts that should be serviced by the user. Therefore, do not open the device.
The exclamation mark symbol on the device indicates that the user should read these operating
instructions prior to using the product.

The „hand" symbol marks special tips and operating notes.
26
Operating Instructions

English