D) Setting Standby Power Intake Of The Consumer - Sygonix EX 1 Bedienungsanleitung

d) Setting Standby Power Intake of the Consumer

Two different values can be set:
"STANDBY POWER LEVEL"
"LOW STANDBY POWER LEVEL" Power
A different power intake in standby mode appears for the consumers
that switch to an especially power-saving mode after a certain "normal"
standby time.
The input of the standby power intake helps the meter to calculate the
consumption or cost forecast, as well as the display of the respective
operating time and the "energy consumption" of the consumer con-
nected to the meter in the different conditions (activated, standby,
deactivated).
• If you have set the power tariff before setting the standby power consump-
tion (see c), you can continue with the next step right away.
Otherwise, the setting mode must be started by pushing the button "SET"
(3) for approx. 3 seconds. The upper left of the display shows "SET" and the
upper display line shows "24 Hr".
• Briefly push the button "
er intake, see next step.
• The top of the display shows "STANDBY POWER LEVEL", the power intake for
standby mode of the consumer can now be entered.
• Briefly push the button "SET"; (3); the first digit of the power intake will flash.
Change the figures for the respective flashing input item with the button "
" (6) or " " (5).
Confirm the setting with the button "SET" (3) to switch to the next input digit.
After confirmation of the last input digit, the top of the display shows "LOW
STANDBY POWER LEVEL" and the symbol " ".
• Briefly push the button "SET"; (3); the first digit of the power intake will flash.
Change the figures for the respective flashing input item with the button "
" (6) or " " (5).
46
The home technology brand for the entire house. More information at www.sygonix.com
Power intake in the consumer's standby mode
intake
consumer (or energy savings mode in the
standby mode)
" (5) 2x to get to the setting of the standby pow-
with deactivated