C) Setting Power Rate - Sygonix EX 1 Bedienungsanleitung

c) Setting Power Tariff
Two power tariffs can be set (e.g. day and night power) and two periods can
be entered.
• If you have set 12h-/24h-mode and the time before setting the power tariff
(see b), you can continue with the next step right away.
Otherwise, the setting mode must be started by pushing the button "SET"
(3) for approx. 3 seconds. The upper left of the display shows "SET" and the
upper display line shows "24 Hr".
Briefly push the button "
see next step.
• The top of the display shows "TARIFF 1", the power tariff can now be set.
If you only have a single power tariff, enter the same price for both tar-
iffs ("TARIFF 1" and "TARIFF 2"). The starting time does not matter, since
the power costs will be the same.
If you have two different power tariffs (e.g. day and night power), set
the price for day power and the starting time from which onward this
tariff applies for the first power tariff ("TARIFF 1") (e.g. 06:00 AM) and
the price for the night power and its starting time (approx. 10 PM) for
the second one.
Any special times for switching between day and night power (week-
end, holidays) cannot be considered in the meter. Therefore, there are
slight differences between the actual costs and the meter display.
• Briefly push the button "SET"; the currency sign will flash.
• Set the desired currency ("€", "$", "£" or "CHF") with the button
" " (6) or "
• Briefly push the button "SET" (3).
• The first digit of the power price for power tariff 1 flashes.
Change the figures for the respective flashing input item with the button "
" (6) or " " (5).
44
The home technology brand for the entire house. More information at www.sygonix.com
" (5) to get to the setting of the first power tariff,
" (5).