VOLTCRAFT IR 1000-30D Bedienungsanleitung Seite 29

To set and activate the high alarm (HAL), proceed as follows:
- Press the measuring button (5) to switch on the measuring device.
- To activate the high alarm, press the "MODE" button (6) until the high alarm symbol (29)
flashes in the display and "ON" or "OFF" is indicated (menu item "HAL ON/OFF" = high
alarm ON/OFF)
- Use the "up" (4) and "down" (7) buttons to activate ("ON") or deactivate ("OFF") the high
alarm..
- Press the "MODE" button (6) until the high alarm symbols (29) + (28) flash in the display
and a temperature value is displayed (menu item "HAL ADJUST" = adjust high alarm)
- Use the "up" (4) and "down" (7) buttons to enter the value which will trigger the high
alarm when the temperature exceeds it.
- Your changes remain saved when the device is switched off.
To set and activate the low alarm (LAL), proceed as follows:
- Press the measuring button (5) to switch on the measuring device.
- To activate the low alarm, press the "MODE" button (6) until the high alarm symbol (30)
flashes in the display and "ON" or "OFF" is indicated (menu item "LAL ON/OFF" = low
alarm ON/OFF)
- Use the "up" (4) and "down" (7) buttons to activate ("ON") or deactivate ("OFF") the low
alarm..
- Press the "MODE" button (6) until the low alarm symbols (30) + (31) flash in the display
and a temperature value is displayed (menu item "LAL ADJUST" = adjust low alarm)
- Use the "up" (4) and "down" (7) buttons to enter the value which will trigger the low
alarm when the temperature drops below it.
- Your changes remain saved when the device is switched off.
°C/°F selection
- Press the measuring button (5) to switch on the measuring device.
- Press the "MODE" button (6) until the measuring unit (18) flashes in the display.
- Use the "up" (4) and "down" (7) buttons to select the desired measuring unit.
- Press the measuring button (5) to confirm your changes, or press the "Mode" button (6)
to move on to the next setting option.
- Your changes remain saved when the device is switched off.
29