VOLTCRAFT IR 1000-30D Bedienungsanleitung Seite 27

min, max, difference and average function (MIN / MAX / DIF/ AFG)
- Press the measuring button (5) to switch on the measuring device.
- Press the "Mode" key (6) until one of the MIN / MAX / DIF/ AFG /MEMORY symbols (23)
flashes in the display.
MIN (Device shows the smallest value measured during the measurement in the left
secondary display (22).)
MAX (Device shows the highest value measured during the measurement in the left
secondary display (22).)
DIF (Device shows the difference between the highest and the lowest temperature mea-
sured during the measurement in the left secondary display (22).)
AVG (Device shows the average value of the last infrared temperature measurement.
AVG = Average)
MEMORY (Storage function only for IR 1200-50D USB and IR 1600-50D USB)
- Select the desired function with the "up" (4) or "down" (7) buttons.
- Press the measuring button (5) to confirm your changes, or press the "Mode" button (6)
to move on to the next setting option.
MEMORY storage function (only for IR 1200-50D USB and IR 1600-50D USB)
The IR 1200-50D USB and IR 1600-50D USB are able to save up to 100 measured values.
- Press the measuring button (5) to switch on the measuring device.
- Press the "Mode" key (6) until one of the MIN / MAX / DIF/ AFG /MEMORY symbols (23)
flashes in the display.
- Press the "up" (4) or "down" (7) buttons until the MEMORY symbol flashes in the dis-
play.
- Confirm your input with the measuring button (5).
- Use the "up" (4) and "down" buttons (7) to select a memory position (1 - 100) to save an
IR temperature value.
- Carry out an IR temperature measurement. After the measurement, the measured tem-
perature (24) is displayed. Press the button for backlight and laser (8) to save the mea-
sured temperature at the selected memory position. The temperature value is saved in
the selected memory position.
- Use the "up" (4) and "down" buttons (7) to select the next memory position.
- To retrieve the saved temperature values, use the "up" (4) and "down" buttons (7) to
select the memory position you want to read. The saved temperature value is shown in
the right secondary display (21).
If all memory positions are used, you may overwrite any memory position as desired.
27