Connections; Setup Information; Connections General - Philips CDR795 Benutzerhandbuch

DIGITAL
OPTICAL
IN OUT IN OUT
1 2 3 4 5

Connections

1
OPTICAL IN
connect to the digital optical output of an external digital
appliance
2
OPTICAL OUT
connect to the digital optical input of an external digital
appliance
3
DIGITAL IN
connect to the digital coaxial output of an external digital
appliance
4
DIGITAL OUT
connect to the digital coaxial input of an external digital
appliance
5
ANALOG IN L/R
connect to the analogue audio output of an external
appliance
6
ANALOG OUT L/R
connect to the analogue audio input of an external
appliance
7
AC MAINS ~
After all other connections have been made, connect
the mains lead to the wall socket.

Setup information

Place the set on a flat, hard and stable surface. Do not
position the set on top of other equipment that might heat
it up (e.g. receiver or amplifier). If the set is placed in a
cabinet, make sure to leave at least 3.5 cm free around the
set to prevent overheating. Active mobile phones near the
set may cause malfunctions.
ANALOG
L
R
IN OUT
6
7
~
AC MAINS

Connections general

Never make or change connections with the mains
supply switched on.
For playback the following outputs are present:
– Analogue output (ANALOG OUT L/R)
– Digital coaxial output (DIGITAL OUT)
– Digital optical output (OPTICAL OUT)
For external recording the following inputs are present:
– Analogue input (ANALOG IN L/R)
– Digital coaxial input (DIGITAL IN)
– Digital optical input (OPTICAL IN)
These inputs can be connected to the corresponding
output(s) of your amplifier/receiver or directly to the
corresponding output(s) of the external appliance.
It is not possible to connect a turntable directly to
ANALOG IN L/R. If you wish to use a turntable with
the set, you have to connect an amplifier/receiver to
ANALOG IN L/R on the CD player/recorder.Then
connect the turntable to the amplifier.
The connections you make will depend upon the
possibilities your audio equipment offers and how you are
going to use the set. Please refer to the user manuals for
your audio equipment first.
We recommend doing analogue recording only if digital
recording is not possible. Digital recording will result in
better sound quality.
If possible, always make both digital and analogue
connections. In this way you can always make analogue
recordings when digital recording is not possible.
Connections
7