Installations; Analogue Connections; Digital Connections - Philips CDR795 Benutzerhandbuch

Installations

Analogue connections

These connections are required for playback and recording
via an amplifier/receiver, equipped with analogue in- and
outputs.
DIGITAL OUTPUT
OPTICAL COAX
PHONO PHONO CD CD
IN IN IN IN
L L
R R
DIGITAL
OPTICAL
IN OUT IN
1
Connect the red plug of the supplied audio cable (cinch) to
the red socket ANALOG IN R and the white plug to the
white socket ANALOG IN L on the CD player/recorder.
2
Connect the other end of the audio cable to the analogue
outputs of the amplifier/receiver (CDR OUT,TAPE OUT,
AUX OUT, REC OUT, etc.).
3
Connect the red plug of the supplied audio cable (cinch) to
the red socket ANALOG OUT R and the white plug to the
white socket ANALOG OUT L on the CD player/recorder.
4
Connect the other end of the audio cable to the analogue
inputs of the amplifier/receiver (CD-R,TAPE IN, AUX,
PLAY IN, etc.).
5
Connect all other components of your system (tape deck,
CD player, tuner, turntable, etc.) via their analogue outputs
to the appropriate analogue inputs of the amplifier/receiver
(CD IN,TUNER IN, AUX IN, PHONO IN, etc.).
Recording can be done now with any appliance, connected
0 0
to an analogue input of the amplifier/receiver. Press INPUT
on the CD player/recorder repeatedly to select the
analogue input.
ANALOG IN is displayed.
8
TURNTABLE
ANALOG OUTPUT
L
R
CD PLAYER
CDR/TAPE
IN OUT
L
R
AMPLIFIER/
RECEIVER
ANALOG
L
R
CD PLAYER/
OUT IN OUT
RECORDER
How to connect if the analogue output on the
amplifier/receiver is already being used (occupied)
Most amplifiers/receivers have multiple analogue output
connections (TAPE,VCR,...), but some amplifiers/receivers
have only 1 analogue output. In case you have already
hooked up a tape deck (DAT recorder or MD recorder) to
this output you will have to change the existing
connections.
1
Disconnect the analogue connections from the tape deck
to the amplifier/receiver.
2
Connect the CD player/recorder (see steps 1–4 in the
previous chapter).
3
Connect the analogue outputs of the tape deck to any free
analogue inputs (AUX, CD) on the amplifier/receiver.You
can now playback your tape or record from your tape deck
on CD. However, it is no longer possible to record on tape.

Digital connections

Direct digital coaxial connection
This connection is required for direct recording from any
digital audio equipment with a digital coaxial output
(e.g. CD player or DVD player).
DIGITAL OUTPUT
OPTICAL COAX
DIGITAL
OPTICAL
IN OUT IN OUT
Use a digital coaxial cable to connect the coaxial output of
the external appliance with DIGITAL IN on the
CD player/recorder.
Recording can be done now via the digital coaxial input.
0 0
Press INPUT on the CD player/recorder repeatedly to
select the digital coaxial input.
DIGITAL IN is displayed.
ANALOG OUTPUT
L
R
CD PLAYER
ANALOG
L
R
CD PLAYER/
IN OUT
RECORDER